News

Focus on the development, production and sale of range hoods and gas hobs.

How to remove cooker hood filter


release time:

2025-04-17

Step-by-step guide to safely detach cooker hood filters: turn off power, release clips/screws, and gently lower. Includes tips for mesh/baffle filter types.

The cooker hood is the "air purification hero" in the kitchen. During cooking, it works hard to drive away thick smoke, oil stains, and unpleasant odors. The filter, as a crucial part for air purification, acts like a guard to block suspended pollutants. Regularly removing and cleaning the filter can maintain the strong suction of the cooker hood, extend its service life, and keep the kitchen air fresh. If the dirt on the filter is left unattended, the suction of the cooker hood will decline, and it may also emit strange smells, spoiling the cooking mood.

Before cleaning the filter, prepare rubber protective gloves to prevent stains and scratches. A soft-bristled brush is used to deeply clean the gaps in the filter. A mild dish soap solution can break down oil stains. A microfiber cloth is for wiping the filter and the housing. For stubborn filters, a plastic putty knife can be used for removal, and a container for soaking the filter can loosen stubborn dirt.

There are skills in filter removal. First, cut off the power supply and wait for the cooker hood to cool down. Then, identify the filter type. Metal mesh filters are commonly found in ducted cooker hoods, while carbon filters are more common in recirculating models. After finding the quick-release latches or preparing a magnetic tray to remove the screws, hold the filter frame with one hand and tilt the filter downward at a 45-degree angle with the other hand for removal. If there are multiple filters, remove them sequentially and mark the numbers. Immediately put the removed filters into a sealed plastic bag after removal, and finally wipe the exposed filter housing with a damp microfiber cloth.

In terms of daily maintenance, if the kitchen is not used frequently, it is recommended to clean the filter once a month. When encountering stubborn oil stains, enzymatic cleaners can easily solve the problem. When removing the filter, don't forget to check whether the rubber seals are aging or damaged. Record the maintenance dates on the kitchen calendar to prevent forgetting.

To clean the metal mesh filter, mix baking soda and water in a ratio of 3:1 to make a paste, scrub along the texture, and then rinse with white vinegar. For carbon filters, use special cleaners and a soft toothbrush for surface cleaning. Never soak carbon filters.

If the filter is stubborn during removal, apply food-grade lubricant around the frame and wait for 15 minutes before trying again. If the screws are difficult to unscrew, use a hair dryer on a low heat setting to blow on them, taking advantage of the thermal expansion and contraction principle of metal to make it easier to unscrew the screws.

Before installing the filter, make sure the filter is completely dry. Align with the arrow markings for installation. After installation, test-run the cooker hood and use a piece of paper to test the suction at the air outlet to check if the installation is in place.

With proper maintenance, metal filters can last 5 - 7 years, and carbon filters need to be replaced every 4 - 6 months. If the filter is deformed, rusted, still has an odor after cleaning, the suction of the cooker hood weakens, or the motor makes abnormal noises, it's time to replace the filter in a timely manner. Mastering these techniques for removing and maintaining cooker hood filters can make the kitchen ventilation system operate efficiently and reduce energy consumption. Take action now!

google-site-verification=H22vpv9wpDYE1zcH-Ek-zfjYvpfhhEO5cQ6UdNcNqTg